REPAIR SERVICE FOR YOUR WORK PLATFORM
Your competent partner for technical problems
Do you have your own work platform that no longer works and are at a loss? You need spare parts? You have your own equipment, but nobody in your company takes care of the ongoing maintenance of the equipment? maltech is happy to support you in ensuring that you enjoy your work platform or forklift for as long as possible.
maltech repair services at a glance
- state-of-the-art workshops: with five locations in Austria, there is always a maltech branch close to you
- competent personnel: 45 years of know-how in the repair of work platforms
- mobile service team on site: with thirteen fully equipped service vehicles
- transport units: if necessary we will pick up your piece of equipment and return it after the repairs are done
- spare rental equipment: to avoid downtime you will receive a replacement unit at special conditions
Good to know: maltech offers you comprehensive services, regardless of whether you bought the equipment from maltech or from another supplier.
If your work platform no longer functions properly, you need quick and uncomplicated support.
The maltech service technician will visit you with one of our service vans and get to the bottom of the matter. Often the problem can be solved then and there.
In difficult cases or if the rectification of the cause of damage is more complex, it may be necessary to transport your equipment to the nearest maltech workshop. We will be happy to assist you in organising the transport.
We are also happy to provide you with a rental machine at special conditions to bridge the need for work platforms.
Contact the workshop manager of the nearest subsidiary.
Your machines can suffer many possible damages or malfunctions. Regardless of the problem, our service technicians will be happy to help you and repair your machine.
Hydraulic defects e.g. in case of hose bursts, oil loss, leaking cylinders ...
Electrical faults e.g. in case of control issues, malfunctions, cable breakage ...
Damage to steel structures ... e.g. bent railings, cracks ...
Good to know: If possible, repairs are carried out on site. Only in complex cases the repair in one of the maltech workshops is necessary.
Spare parts supply
Sometimes you only need one spare part. We are happy to supply you with the necessary spare parts for work platforms of all makes. Talk to us!
Regular care and service reduces the susceptibility to faults and increases the service life of your machine. According to the manufacturers, the following activities should be carried out once a year:
- Check safety devices and limit switches
- Check all driving and movement functions and adjust them if necessary
- Check hydraulic system for leaks and hose damage
- Check batteries and clean battery terminals
- Check bearings and joints
- Check steering system and brakes
- Lubricate the unit completely
- Change oil filter and hydraulic oil
- Clean electric motor and replace motor brushes if necessary
- Service diesel engines
- Check and clean the charger
A handy detail: Get a maintenance contract and maltech takes care of all these points.
Inspection according to §8 AM-VO
According to the regulations of section 1 § 8 of the Work Equipment Ordinance, work platforms must be inspected annually by a state-sworn expert for their operational safety and functionality.
This inspection must be documented in the inspection book of the work platform. We would be happy to organise this inspection for you and then remedy any defects that may have been found.
During a general overhaul, your work platform is brought up to scratch from top to bottom and is then almost as good as new. Visually and technically.